Sae 100r10 heavy duty, four-spiral steel wire reinforced, rubber covered hydraulic hose

Type A - Thick cover (skive type)
Type AT - Thin cover (no-skive type)
Construction: This hose consists of an inner tube of oil synthetic rubber, four wire spiral reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: Four wire spiral reinforcement.
Cover: Hydraulic fluid and weather resistant thermoplastic cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃~+100℃

  
SAE 100R10 
Structure picture 
  
Specification:
Nominal
diameter
Inside
Diameter
Reinforcement
Diameter
Outside
Diameter
Working
Pressure
Proof
Pressure
Burst
Pressure
Min.Bend
Radius
mmmmmmMPaPSIMPaMPamm
mminchminmaxminmaxmaxmin
6.31/4"7.78.519.4+-0.560.38744120.6241.2125
103/8"9.510.522.2+-0.551.77497103.4206.8150
12.51/2"12.713.525.9+-0.543.1625086.2172.4200
193/4"1919.832.6+-0.53534.5500369138280
251"252639.4+-0.543.527.6400255.2110.4360
31.51-1/4"323346.7+-0.55020.7300241.482.8460
381-1/2"37.7395.25+-0.55617.2249434.468.8560
512"50.45265.4+-0.571.517.2249434.468.8710




*

*

*

*

:ming.pearl
:567753514