SAE 100R9 High pressure, four-spiral steel wire reinforced, rubber covered hydraulic hose

Type A - Thick cover (skive type)
Type AT - Thin cover (no-skive type)
Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: Four wire spiral reinforcement.
Cover: Hydraulic fluid and weather resistant thermoplastic cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃~+100℃

  
SAE 100R9 
Structure picture 
  
Specification:
Nominal
Diameter
Inside
Diameter
Reinforcement
Diameter
Outside
Diameter
Working
Pressure
Proof
Pressure
Burst
Pressure
Min.Bend
Radius
Weight
mmmmmmMPaPSIMPaMPammKg/m
mminchminmaxminmaxmaxmaxmin
103/8"9.310.117.418.220.5314495621241250.7
12.51/2"12.313.520.321.123.527.6400255.2110.41800.83
193/4"18.619.827.328.130.720.7300241.482.82401.3
251"2526.435.436.23920.7300241.482.83001.7
31.51-1/4"31.43344.845.64917.2249434.468.84203.08
381-1/2"37.739.350.651.413.8200127.655.25003.4
512"50.45264.665.413.8200127.655.26604.35




*

*

*

*

:ming.pearl
:567753514